›

Judge the best replica prop

12467

Comments

  • MurdockMurdock The minus world
    Posts: 16,351
    chrisisall wrote:
    Here's Airwolf:

    SANY9767_zps8a7d2eab.jpg

  • chrisisallchrisisall Brosnan Defender Of The Realm
    Posts: 17,801
    Yeah Baby!!! \m/
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    Love the chopper, @chrisisall! It didn't take you long to finish it. =D>
  • chrisisallchrisisall Brosnan Defender Of The Realm
    Posts: 17,801
    QBranch wrote:
    Love the chopper, @chrisisall! It didn't take you long to finish it. =D>
    Well it's100% done now:
    SANY9805_zpscebfc629.jpg
    SANY9802_zps314b1fef.jpg
  • MrcogginsMrcoggins Following in the footsteps of Quentin Quigley.
    Posts: 3,144
    It looks great against the snow good call there.
  • MurdockMurdock The minus world
    Posts: 16,351
    Now to build a life sized replica. ;)
  • WillyGaloreWillyGalore
    Posts: 6,396
    Brilliant @chrisisall
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    That's really cool, @chrisisall. Top marks. Nice touch showing it in the sun with snow landscape. Can we expect to see any Bond models from yourself in future?
  • Master_DaharkMaster_Dahark
    Posts: 4,813
    Oh wow that turned out great! Looks like a screenshot from the tv show!
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    edited November 2015 Posts: 14,585
    Here's the latest additions to the collection- the Drax Air Freight badge and photo of Tatiana:

    Found it in a warehouse in Rio
    12116202415_cf6b7358f5_o.png
    http://farm6.staticflickr.com/5534/12116868825_9df191e60a_o.png

    I'm sure I'll recognise this lady when I see her ;)
    12115378744_990eee8bb2_o.png
    This Univex card is not featured in any film, but I wanted to create one with the logo from the <a href="http://screenmusings.org/movie/dvd/For-Your-Eyes-Only/images/For-Your-Eyes-Only-0025.jpg">helicopter</a>; and make it a 'what if?' prop for the Moore era.
    12115117245_26b2a54ba0_o.png
    back of card
    12116410054_71ae3be69c_o.png
    12116214185_67c3d56458_o.png
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    Just finished some props from AVTAK.

    Zorin cheque copy
    12170411086_3ba99572c8_o.png
    Zorin microchip- it actually is totally impervious to magnetic pulse damage... because it's made from paper and plastic :))
    12170172834_d2c0d508d3_o.png
    I made the chip housing and window glass out of a plastic folder.
    12169755315_f416157488_o.png
    12170162784_132bf5e878_o.png
  • WillyGaloreWillyGalore
    Posts: 6,396
    Really great work @QBranch. Bet all the kids come to you for fake I.D.'s ;-)
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    edited January 2014 Posts: 14,585
    Cheers @WillyGalore- M doesn't mind me earning a little money on the side. ;)
  • MurdockMurdock The minus world
    Posts: 16,351
    Great work @QBranch. You have got da skillz my friend. :D
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    My first Bond watch prop is finally completed!

    14067802893_4d1b8047b1_o.png
    It’s the Seiko 0674 from The Spy Who Loved Me. This one took me a while to find, and then, it was just the case I received, so I also had to find a similar bracelet to look the part. The inner module needs repairing, so at the moment I just have a faux screen in there for display purposes.

    and with the ‘ticker tape’ message attached
    14067799413_85dd2bb787_o.png
    14024645076_d7f29b3524_o.png
    That’s all for now. Gotta run- England needs me ;)
  • WillyGaloreWillyGalore
    Posts: 6,396
    I'd take more time reading your post but sorry @QBranch, something came up! ;-)
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    That's okay Willy, I understand. The British end can pop up when you least expect it ;)
  • MurdockMurdock The minus world
    Posts: 16,351
    Fantastic work @QBranch. I can hear the ticking sound for when the label is made. ;)
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    Cheers Murdock! I would explain how it works, but it's all rather complicated ;)
  • MurdockMurdock The minus world
    Posts: 16,351
    I'll just take your word for it. ;)
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    edited April 2014 Posts: 14,585
    This here is the first genuine Bond watch I acquired.

    13885333589_303dd2e6c2_o.png
    It’s the Seiko M354 from Moonraker. All the functions worked, including the light, but I’ve taken out the module and inserted a faux screen as a permanent display. The bracelet is also by Seiko- it’s neither the original bracelet nor the one seen in the film- but it’s identical, apart from the clasp.

    13885340940_1c5cc76b9d_o.png
    It feels so comfy on the wrist, I had to check I was still wearing it!

    With the detonation wire and explosive attached
    13885340218_13ef480ece_o.png
    I made the ‘explosive’ by gluing an earphone cable into a coil- a rather fiddly task, but it turned out well. The gold connector is cut from a pen cartridge, and the steel wire is from a retractable key chain.

    13885329629_40d249146b_o.png
    Now if you'll excuse me, I'm off to blow up exhaust grates so I can crawl into tight spaces with Miss Goodhead ;)
  • MurdockMurdock The minus world
    Posts: 16,351
    I hope we'll see some gratuitious sex and violence. But once again, fantastic work my friend. :)
  • WillyGaloreWillyGalore
    Posts: 6,396
    Nice work again @QBranch. Don't forget to 'bang on time'. ;-)
  • MurdockMurdock The minus world
    Posts: 16,351
    I always say, the Best Bond gadgets are the ones you can make yourself. ;)
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    Thanks guys! That means a lot.
    WillyGalore wrote:
    Nice work again @QBranch. Don't forget to 'bang on time'. ;-)
    Just took a few seconds, Willy :\">
    Murdock wrote:
    I always say, the Best Bond gadgets are the ones you can make yourself. ;)
    Exactly. Did you notice, I made the watch out of cardboard? Pretty spot on, eh? :-B
  • MurdockMurdock The minus world
    Posts: 16,351
    So this is where they keep the old relics in aye?
    MeHNFng.jpg
    RL1QE5k.jpg
    pmV6M56.jpg
  • MayDayDiVicenzoMayDayDiVicenzo Here and there
    edited May 2014 Posts: 5,080
    QBranch wrote:
    Just finished some props from AVTAK.

    Zorin cheque copy
    12170411086_3ba99572c8_o.png
    Zorin microchip- it actually is totally impervious to magnetic pulse damage... because it's made from paper and plastic :))
    12170172834_d2c0d508d3_o.png
    I made the chip housing and window glass out of a plastic folder.
    12169755315_f416157488_o.png
    12170162784_132bf5e878_o.png

    Exceptional work, @QBranch! I would have thought it was the real thing!
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    Thanks, @MayDayDiVicenzo! I really appreciate the compliment. The microchip was my first completed non-paper prop.

    @Murdock Awesome props there! Q highly approves ;) Now let's see your gun cache. That Star Trek collectibles book would be an interesting read.
  • MurdockMurdock The minus world
    Posts: 16,351
    QBranch wrote:
    @Murdock Awesome props there! Q highly approves ;) Now let's see your gun cache. That Star Trek collectibles book would be an interesting read.

    All in good time. Right now I'm getting ready to hang a peg board on my wall. And thanks That Star Trek collectible book is a great read. It inspired my own trek tech collection. :)
  • QBranchQBranch Always have an escape plan. Mine is watching James Bond films.
    Posts: 14,585
    I thought I'd share some work in progress regarding watch gadgets. Unlike the Seikos I posted earlier, I'm making these two here working gadgets. I've a long way to go to get the buzz saw running- I've only put together the face so far. I need to figure out how I'm going to get it to spin, and I guess that all comes down to the right motor and housing. The other one will be the torch from TWINE. There's just a test dial in there ATM to see how the LEDs shine through. The next step is to solder some wires onto the LEDs and construct the battery housing. What I'm really hoping to achieve with both projects is to get them working like seen in the film while not having any parts sticking out or making the casing much thicker than it already is.

    14071005529_ed8630ba23_o.png
Sign In or Register to comment.